System Integration; Configuration - Balluff BNI PNT-502-102-Z078 Konfigurationsanleitung

BNI PNT-508-105-Z067 / BNI PNT-508-105-Z077 / BNI PNT-502-102-Z078
Network interface
2

System integration

2.1

Configuration

When planning PROFINET devices, a device is mapped as
a modular system, which has a Headslot and several data
modules.
GSDML file
The GSDML files are available in two languages at
www.balluff.com.
The device data required for project planning is stored in
GSDML files (Generic Station Description Markup
Language). The data modules of an IO-Link module are
displayed in the project planning software itemized by
slots.
The GSDML file provides the possible data modules (input
or output of different data widths). To configure the IO-Link
modules, the corresponding data modules are assigned to
a slot.
Fig. 2-1: Integrating a module
www.balluff.com
Integrating a module
The device can be found in the catalog via the search
function and pulled into the PROFINET string via drag &
drop (see Fig. 2-1).
The BNI PNT... module with the PN-IO, Port 1-M12 and
Port 2-M12 sub-modules are used for PROFINET
communication.
In X1 PN-IO, functions such as prioritized startup or the
domains for the ring topology can be selected.
In slot 0, the port function (input, output, diagnostic input)
or diagnostic reports can be defined.
The remaining slots preset in the standard configuration
(1...8) are place holders for the IO-Link modules or
standard I/O modules. Slot 1 represents the first IO-Link or
SIO port and slot 8 represents the last.
If IO-Link communication is provided for at the
corresponding port, the standard I/O module must be
deleted and replaced with an IO-Link module (e.g.
IOL_E/A_32/32 Byte).
english 5