Residual Risks; Technical Data; Unpacking - Scheppach SBS1100 Original Bedienungsanleitung

Safety instructions for table-top grinding machines
a) Never use damaged accessory tools. Check
tool attachments such as grinding discs
for chipping and cracks before each use.
Once you have checked and used the tool at-
tachment, ensure that you and all other per-
sons in the vicinity remain outside the plane
of the rotating tool attachment and allow the
device to run for 1 min. at the maximum speed.
Damaged tool attachments usually break during
this test period.
b) The permissible rotational speed for tool attach-
ments must be at least as high as the maximum
speed cited on the electric tool. Accessories
which rotate faster than the maximum permissible
rate can break and throw pieces into the air.
c) Never grind on the side surfaces of the grind-
ing disc. Grinding on the side surfaces can cause
the grinding disc to break and fly apart.

6. Residual risks

The machine has been built according to the state-of-
the-art and the recognised technical safety require-
ments. However, individual residual risks can arise
during operation.
• Health hazard due to electrical power, with the use
of improper electrical connection cables.
• Furthermore, despite all precautions having been met,
some non-obvious residual risks may still remain.
• Residual risks can be minimised if the "Safety infor-
mation" and the "Proper use" together with the oper-
ating manual as a whole are observed.
• Avoid accidental starting of the machine: the op-
erating button may not be pressed when inserting
the plug in an outlet. Use the tool attachment that
is recommended in this operating manual. This is
how to ensure that your machine provides optimum
performance.
• Keep your hands away from the work area, when the
machine is in operation.
7.

Technical data

Motor
Power consumption
Idle speed
Diamond
wheel
Ceramic disc
Adjustment angle
Saw blade min. - max.
Weight approx.
Technical changes reserved!
*S1: Continuous operation with constant load
**S3 50%: Periodic intermittent operation without start-up
process influence on the motor warming up. The mode
comprises of a start-up period, a time with constant load
and an idle time. The operating time is 30 mins, the rela-
tive duty cycle is 50% of the operating time.
Noise and vibration
m Warning: Noise can have serious effects on your
health. If the machine noise exceeds 85 dB (A), please
wear suitable hearing protection.
Noise data
Sound power level L
Sound pressure level L
Uncertainty K

8. Unpacking

• Open the packaging and carefully remove the device.
• Remove the packaging material, as well as the pack-
aging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the device and accessory parts for transport
damage. In the event of complaints the carrier must
be informed immediately. Later claims will not be
recognised.
• If possible, keep the packaging until the expiry of the
warranty period.
• Familiarise yourself with the product by means of the
operating instructions before using for the first time.
• With accessories as well as wearing parts and re-
placement parts use only original parts. Replace-
ment parts can be obtained from your dealer.
www.scheppach.com
**S3 50%: 110W
grinding Ø100 x Ø20 x 1.5 mm
Ø103 x Ø10 x 7 mm
82 dB(A)
WA
69 dB(A)
pA
3 dB(A)
WA/pA
230 V~ / 50 Hz
*S1: 45W
5700 min
-1
-25° - 25°
Ø 90 - 400 mm
4,9 kg
GB | 23