Introduction; Device Description - Scheppach SBS1100 Original Bedienungsanleitung

1.

Introduction

Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer
We hope your new tool brings you much enjoyment and
success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this device assumes no liability for
damage to the device or caused by the device arising
from:
• Improper handling,
• Non-compliance with the operating manual,
• Repairs carried out by third parties, unauthorised
specialists.
• Installing and replacing non-original spare parts
• Application other than specified
• Failure of the electrical system in the event of the
electrical regulations and VDE provisions 0100, DIN
13 / VDE0113 not being observed
Please consider:
Read through the complete text in the operating manu-
al before installing and commissioning the device.
The operating manual is intended to help the user to
become familiar with the machine and take advantage
of its application possibilities in accordance with the
recommendations.
The operating manual includes important instructions
for safe, proper and economic operation of the device,
for avoiding danger, for minimising repair costs and
downtimes, and for increasing the reliability and ex-
tending the service life of the device.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the device in your country.
Keep the operating manual package with the machine at
all times and store it in a plastic cover to protect it from dirt
and moisture. They must be read and carefully observed
by all operating personnel before starting the work.
The device may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards.
The required minimum age must be observed.
20 | GB
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such machines must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Device description (Fig. 1 - 12)
1. Handle
1a. Hexagonal nut
2. Protective panel
2a. Fixing screw with nut
3. Grinding disc protective cover
3a. Screws for grinding disc protective cover
4. Grinding disc
4a. Hexagonal nut
4b. Grinding disc flange outer
4c. Grinding disc flange inner
4d. washers
5. Stop
5a. Stop support bar
6. Saw blade support
6a. Hexagonal nut
7. Scale
8. Base plate
9. Pointer
10. Saw blade holder
10a. Taper flange
10b. Spring
10c. Washer
10d. Star grip nut
11. Swivel arm
11a. Swivel arm support bar
11b. Star grip nut
12. Grinding unit
12a. Hexagon socket screws
13. Hexagonal nut for angle setting
14. Depth stop
15. On/off switch
16. Washers
17. Allen key, 5 mm
18. Open-ended spanner, size 14/17
19. Open-end spanner, size 8/10
www.scheppach.com