Retrofitting A Plux Decoder (Only For Item 72162); Maintenance Of The Model; Decoupling Of Locomotive And Tender; Cleaning Of Wheel Contact - roco 140-US-2287 Handbuch

▪ Retrofitting a PluX decoder (only for Item 72162)

Remove the jumper from the interface.
Finally put the plug of the chip into the interface as shown.
Deoder 22-pin
(10881/10883)
In order to ensure that your locomotive provides you with many years of pleasure, certain service work at regular
intervals (approx. every 30 operating hours) is advisable.
Before commencing care and maintenance work on the model, first uncouple the locomotive from the tender.

▪ Decoupling of locomotive and tender

▪ Cleaning of the wheel-current contacts
Wheel contacts easily get dirty on tracks which are not entirely clean. Use a small brush to remove dirt from spots
marked.
16
16
8072162920.indd 16
Decoder 16-pin
(10880/10882)

Maintenance of the model

07.12.2016 09:39:01