Attaching The Exhaust Air Hose - hanseatic SY-103E9A-P1-C84-L121-600 Gebrauchsanleitung

(11)
9. Carefully mount the Exhaust hood on
the two round-head screws (11) on the
keyhole openings.
10. If necessary, remove the Exhaust hood
again to loosen or tighten the screws
in order to ensure that the hood is flush
with the wall.
2x
11. Turn two round-head screws (12)
into the prepared wall plugs to se-
cure the Exhaust hood and screw the
Exhaust hood tightly to the wall.
(11)
12. Place the grease filter (17) with the pins
into the openings.
13. Slide the lock (16) to the left; snap the
grease filter (17) in and release the lock.
14. Close the cover (15) again and allow it
to click into place. The Exhaust hood is
now mounted to the wall.

Attaching the exhaust air hose

The exhaust air hose (4) must be installed
(12)
if you intend to use the exhaust hood with
exhaust air operation.
(4)
1. Insert the end of the exhaust air hose (4)
with the larger diameter (153 mm) into the
connection with the check valve.
2. Secure the lower end of the exhaust hose
with the cable tie (9).
Page EN-17
Assembly
(15)
(16)
(17)
(9)