Attaching The Exhaust Air Hose; Final Steps - hanseatic SY-103D5-E7-C59-L52-900 Gebrauchsanleitung

Page EN-14 Assembly
4. If necessary, remove the exhaust hood
again to loosen or tighten the screws in
order to ensure that it is flush with the
wall.
(5)
5. Turn two round-head screws (5)
into the prepared wall plugs to se-
cure the exhaust hood and screw the
exhaust hood tightly to the wall.
Installation under a cabinet unit
If the exhaust hood is being installed beneath
a cupboard: mark the air outlet for the exhaust
air hose (2) on the bottom of the cabinet and
saw the opening into the cabinet. To do this
1. Drill a hole inside the circle with a wood
drill.
2. Starting from there, saw out the circle us-
ing a jigsaw.
3. Smooth the edges with sandpaper.
Attaching the exhaust air
hose
The exhaust air hose (2) must be installed
if you intend to use the exhaust hood with
exhaust air operation.
(2)
1. Insert the end of the exhaust air hose (2)
with the larger diameter (153 mm) into the
connection with the check valve (3).
2. Secure the lower end of the exhaust hose
with the cable tie (4).

Final steps

• Connect the mains plug to a properly in-
stalled socket.
Installation is now complete.
(4)