Shredding Attachment - Bosch CompactPower MFW36 Serie Gebrauchsanleitung

Preparation for kebbe maker
X Fig. F
1. Insert the worm gear with the agitator
paddle at the front in the housing.
2. First fit the conical ring onto the worm
gear and then the kebbe nozzle into the
housing.
3. Fit the threaded ring onto the housing
and screw tight in a clockwise direction
without using force.
The kebbe maker is now prepared.
Preparation for pasta maker
X Fig. G
1. Insert the worm gear with the agitator
paddle at the front in the housing.
2. Insert the required pasta disc into the
housing.
3. Fit the threaded ring onto the housing
and screw tight in a clockwise direction
without using force.
The pasta maker is now prepared.
Preparation for whirl maker
X Fig. H
1. Insert the worm gear with the agitator
paddle at the front in the housing.
2. First fit the dough nozzle into the
housing and then the forming disc.
3. Rotate the forming disc until the
required profile is at the bottom.
4. Fit the threaded ring onto the housing
and screw tight in a clockwise direction
without using force.
The whirl maker is now prepared.
Use
Note: The food is processed in different
ways depending on the application.
X "Recipes" see page 25
The following example describes use of
the base attachment as a meat mincer:
W Risk of injury!
– Do not reach into the feed chute with
your hands.
– Only use the pusher when adding more
food.
MFW3612A _EU_8001187438.indb 23 MFW3612A _EU_8001187438.indb 23

Shredding attachment

Caution!
– Do not process bones, gristle, sinews or
other solid components.
– Do not process frozen meat.
– Do not apply great force with the pusher.
X Sequence of figures I
1. Fit the prepared attachment onto the drive
of the base unit, holding it at an angle.
2. Turn the attachment anticlockwise until
you hear it click into position.
3. Fit the filling tray and insert the pusher
in the feed chute.
4. Prepare your food. Chop up large parts
beforehand so they fit into the feed
chute without having to press them in.
5. Place a suitable container under the
attachment. Add the prepared food to
the filling tray.
6. Connect the mains plug. Switch on the
appliance.
Note (MFW36.../MFW38...):
After switching on, the appliance runs at the
ideal speed 2 (fast).
7. Use the pusher to slide the food down
the feed chute, applying light pressure.
8. Once you have finished, switch off the
appliance and pull out the mains plug.
9. Remove the filling tray and pusher.
10. Hold down the release button and turn the
attachment clockwise until it disengages.
11. Remove the attachment, take it apart
and clean all parts. X "Care and daily
cleaning" see page 25
Shredding attachment
For shredding, grating and slicing items
such as cheese, fruit, vegetables, nuts,
almonds, dried bread rolls and other hard
foodstuffs. Select the appropriate insert
depending on the type and consistency of
the food to be processed. X "Tips" see
page 27
Preparation
W Risk of injury!
Do not reach into the sharp blades and
edges of the shredding, grating and slicing
inserts.
en
23
14.02.2020 15:26:06 14.02.2020 15:26:06