Silvercrest SV 125 C6 Bedienungsanleitung Seite 13

NOTE
The bag opening must lie flat on the sealing wire 4. Otherwise the weld-
►
ing does not work properly.
4) Close the appliance lid 1. The press seal q presses the bag onto the
sealing wire 4 to create a smooth seam. Ensure that both corners of the
appliance lid 1 click closed. If necessary, press them down once again on
the markings
locks shut.
5) Press the
process is completed, the control lamp w flashes briefly and then goes out.
NOTE
► You can halt the sealing process at any time by pressing the
again. The control lamp w flashes and then goes out.
■ 10 │ GB │ IE
so that the appliance lid 1 clicks into place and
and
button w. The control lamp w lights up. As soon as the sealing
button w
SV 125 C6