Installation Of Pleated Filter And Protective Net - Daikin BAEF125AWB Installationsanleitung

9. INSTALLATION OF PLEATED FILTER AND PROTECTIVE NET

1. Install pleated filter (1).
(1) Take pleated filter (1) out of its bag.
(2) With the arrow (AIR FLOW) on the side of pleated filter (1) facing upwards, insert it into the guide rail
on the side of the latching hooks and insert it all the way.
(3) Push up pleated filter (1).
(4) Turn the hook (filter) (2 locations) to secure pleated filter (1). (Figure 24)
2. Remove the protective film from the reflector.
3. Install the protective net.
(1) Hook the protective net to the latching hooks of the UV streamer air purifier unit and push the
protective net into the UV streamer air purifier unit by pivoting around the latching hooks.
(2) While holding with one hand, turn the hook (protective net) (2 locations) to secure the protective net.
Latching hook
Protective net
4. Attach the suction grille of the decoration panel.
(For the attachment method, refer to the installation manual supplied with the decoration panel.)
English
01_EN_3P701968-3.indd 18 01_EN_3P701968-3.indd 18
UP - towards ceiling
Down - towards ground
Up
Down
Guide rail on the side of
the latching hooks
Figure 24
Reflector
Remove the protective film.
Arrow view A
Figure 25
Figure 26
Hook (Filter) 2 locations
A
Hook (Protective net)
2 locations
18
12/05/2023 15:12:34 12/05/2023 15:12:34