Installation Of Decoration Panel - Daikin BAEF125AWB Installationsanleitung

8. INSTALLATION OF DECORATION PANEL

• Install and wire the decoration panel.
• Remove the suction grille of the decoration panel. (For the removal method, refer to the operation manual
supplied with the decoration panel.)
• Of the screws (3 locations) on the control box lid of the UV streamer air purifier unit, first remove the
2 screws on the right and left, then loosen the screw in the centre to remove the control box lid.
1. Attach the decoration panel after hooking the temporary latches of the decoration panel to the hooks of
the UV streamer air purifier unit. (Refer to Figure 15.)
(The lead wires of the swing motor.)
2. Remove the decoration cover at the position shown in Figure 16 (marked with
(Refer to Figure 16.) (The removed decoration cover is no longer needed.)
13
01_EN_3P701968-3.indd 13 01_EN_3P701968-3.indd 13
Hook
Temporary latch
Figure 15
Figure 16
Lead wire of the swing motor
Remove the decoration cover
(between and
* The corner cover with operation
display (5) can only be attached
in this position.
and ).
).
English
12/05/2023 15:12:31 12/05/2023 15:12:31