Kommandos Für Paramtm.exe (Sinumerik One) - Siemens SINUMERIK Funktionshandbuch

A_ReqMMC1 (DB19.DBX250.0)
A_ReqMMC2 (DB19.DBX250.1)
A_K_Code (DB19.DBB251)
E_Done (DB19.DBX252.0)
E_Error (DB19.DBX252.1)
E_Active (DB19.DBX252.2)
E_Ident_Ready (DB19.DBX252.7)
E_K_CodeError (DB19.DBB253)
E_Error_Code (DB19.DBW254)
Kommandos für Paramtm.exe (SINUMERIK ONE)
Kommandos für Paramtm.exe
E_Req (DB19.DBX256.0)
A_Done (DB19.DBX258.0)
A_Error (DB19.DBX258.1)
A_Active (DB19.DBX258.2)
E_TDC_Read (DB19.DBX259.0)
E_TDC_Write (DB19.DBX259.1)
E_TDC_Cancel (DB19.DBX259.2)
E_TDC_Read_before_Write (DB19.DBX259.3)
A_Error_Code (DB19.DBW260)
E_PMagazine (DB19.DBW262)
E_PMagazinePlace (DB19.DBW264)
E_PTnumber (DB19.DBW266)
Diverse Signale
A_TPMStatus
(DB19.DBW268)
Beschreibung
Datentyp
A_TPMCounter
PLC
Funktionshandbuch, 10/2020, A5E48053808A AD
Ampelstatus
(SINUMERIK ONE)
INT
Referenz zum PLC-Grundprogramm
10.4 Datenbausteine (DB)
241