Pioneer PDA-5001 Bedienungsanleitung Seite 8

Part Names and Functions
INPUT 2
Y C S-VIDEO SCART
Y C 2 S-VIDEO 2 SCART
= ~
75Ωj2.2kΩ
G B R HD VD
[ON SYNC] INPUT3 [H/V SYNC]
#
=
INPUT2 (BNC/S)
For connection of components that have an S-video
output jack or Y/C separate video output jacks (page
8).
Note: Do not use both the S-VIDEO jack and the BNC
jacks in parallel. Doing so may cause this unit to
malfunction or become damaged.
~
INPUT2 (SCART)
For connection of a VCR or similar component
compatible with SCART connections (page 8).
!
INPUT1 (SCART)
For connection of an AV component compatible with
SCART connections (page 8).
@
Video box connection cover
Remove when connecting this unit to the plasma
display, PDP-502MXE (page 5).
#
INPUT3
For connection of components that have RGB or
component output jacks such as a personal computer,
DVD player, or external RGB decoder (page 9).
4
<ARE1351> En
INPUT 1
SCART
1 SCART
!
$
@
MAIN POWER AC INLET
OFF ON
% ^
$
Synchronizing signal impedance selector switch
Depending on the connections made at INPUT3, it
may be necessary to set this switch to match the
output impedance of the connected component's
synchronization signal.
When the output impedance of the component's
synchronization signal is above 75 Ω, set this switch
to the 2.2 kΩ position (page 10).
%
MAIN POWER switch
Use to switch the main power of the unit on and off.
^
AC INLET
Use to connect a power cord to an AC outlet.
&
SPEAKER (L) terminal
For connection of an external left speaker. Connect a
speaker that has an impedance of 8 -16 Ω.
– +
L
SPEAKER
8 Ω – 16 Ω
&