Pioneer PDA-5001 Bedienungsanleitung Seite 11

About the input jacks
Connect the output jacks of components to the input
jacks of this unit and the plasma display following the list
below (pages 8 to 10).
Input jack
INPUT1
Connected
component
(BNC)
and signals
AV component
Composite video
S video
Y/C separate video
Component
RGB
Personal computer
(PC)
*2
Composite video
S video
RGB
*1 Although INPUT3/INPUT4 are compatible with various kinds
of signals, setup using the on-screen menu is necessary after
connections are made in order match the characteristics of
the source component (page 15).
*2 Depending on the video output board of the computer, this
type of connection may not be possible.
*3 INPUT4 is compatible with Microsoft's Plug & Play (VESA
DDC 1/2B).
INPUT1 and INPUT2 jacks are compatible with the
following TV systems: NTSC, PAL, SECAM and
4.43NTSC. Normally, this unit is capable of automatic
signal detection to adjust for differences in the
systems. However, it is also possible to set the
system. For details, please refer to "Setting the
regional TV system format" on page 23.
Note
INPUT1 (SCART) RGB input is not compatible with G on SYNC
signals.
INPUT1 INPUT2 INPUT2
(SCART) (SCART)
(BNC/S)
*2
Installation and Connections
*1 *1
INPUT3 INPUT4
*3
7
<ARE1351> En