Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation and Connections
Connection to INPUT1
Connect an AV component that has a video output jack to
the INPUT1 jacks on this unit. The following two types of
connections are available:
÷ BNC jack connection
÷ SCART jack connection
After connections are made, on-screen setup is
necessary to assign which jack is to be used (page 14).
2
AUDIO
IN
To a separate monitor or
video recording device
Connection to INPUT2
Connect an AV component that has a video output jack to
the INPUT2 jacks on this unit. The following two types of
connections are available:
÷ BNC jack or S-video jack connection (BNC/S)
÷ SCART jack connection (for connection to VCR)
After connections are made, on-screen setup is
necessary to assign which jack is to be used (page 14).
2
AUDIO
IN
8
<ARE1351> En
1
AUDIO
IN
OUT
1
IN
Y
C
2
AV component
1
AUDIO
IN
OUT
1
IN
Y
C
2
S-VIDEO
VCR
The INPUT1 (SCART) jack is compatible with stereo audio
signals (L/R), composite video, and RGB video signals.
The INPUT1 (BNC) jack is compatible with composite
video signals.
The INPUT1 OUT jack (BNC) can be used to output the
video signal to a separate monitor or video recording
device.
Note
A video signal will not be output from the OUT [INPUT1] jack
when the main power of this unit is off or in standby mode.
S-VIDEO
2
SCART
The INPUT2 (SCART) jack is compatible with stereo audio
signals (L/R), composite video, and Y/C separate signals.
Additionally, a stereo audio signal and composite video
signal are output from the INPUT2 (SCART) jack making it
suitable for connection to a VCR.
Connect an AV component that has S-video or Y/C
separate video output jacks to the BNC/S input jacks on
this unit. (The INPUT2 S-VIDEO jack is compatible with S2
output signals.)
Note
Do not use both the S-VIDEO jack and the BNC jacks in parallel.
Doing so may cause this unit to malfunction or become
damaged.
2
SCART
1
SCART
1
SCART
Werbung
