Werbung
Verfügbare Sprachen
Verfügbare Sprachen
b. How to tighten the lock nut: turn the lock
nut anti-clockwise (s. fig. on the right).
c. Please note: The distance between the
lock nut and the adjustable foot must
not exceed 20 mm (2.0 cm)!
NOTICE! After you have levelled the appliance properly, always tighten
the lock nuts again.
2.5 Installation of the bottom cover (noise reduction)
NOTICE! The installation of the bottom cover must be carried out by a
person who is experienced in such work.
intended for such a person. The manufacturer is not liable for any damage
caused by improper installation. However, the appliance can be used
without the bottom cover!
❖ The bottom cover reduces the noise level of the appliance.
1. Remove the surface paper of the double-sided adhesive tape (C) on the four sides
of the bottom cover: s. below, fig. 2 / s. arrows.
29
Not included in guarantee.
29
The following instructions are
~
~
96
Werbung
