Pkm WA10-ES1415DI Bedienungsanleitung Seite 109

4. Operation
4.1 Before the first use
To remove potential residues in the drum of the appliance caused by production,
testing or transportation of the appliance, a complete wash cycle without
laundry (quick washing programme) should always be started before the
first regular wash cycle.
1. Open the water tap.
2. Close the door.
3. Set a quick washing programme (e. g. « Q
appliance is now switched on and in
4. Press the « S
TART
5. The door lock will be activated automatically. The operational status indicator of
the door lock goes on: «
6. When the programme is finished, the display indicates the word « END » and an
acoustic signal sounds (if the acoustic signals are activated / see also chapter 4.4.1
S
ELECTION OF THE ADDITIONAL FUNCTIONS
7. The door lock is deactivated automatically. The operational status indicator of
the door lock goes off: «
8. When the programme is finished, always turn the
programme selection back to « O
also chapter 4.6 E
9. Close the water tap.
4.2 The washing programmes
NOTICE! Always observe the textile labels.
You can receive information about the symbols on the textile labels in chapter
4.2.1 T
EXTILE CARE SYMBOLS
centre.
Please also observe chapter 5. I
/ P » -
AUSE BUTTON
».
».
FF
ND OF A WASHING PROGRAMME
or on the webpage of your local consumer advice
NSTRUCTIONS FOR PROPER USE
~
15` ») using the rotary knob. The
UICK
.
STANDBY MODE
to start the programme.
).
» to switch off the appliance completely (see
).
~
109
for the
ROTARY KNOB
et seq.