Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4.8 Reload laundry
WARNING! If you stop a running programme, the temperature of the
water, the laundry and the drum can be extremely high. Be very careful
while removing the laundry. RISK OF SCALDING! RISK OF BURNS!
It is very important to check the water level and the temperature of the
water in the washing drum before opening the door.
T
O RELOAD LAUNDRY DURING A RUNNING PROGRAMME
1. Press the « S
TART
2. If the running washing programme permits the deactivation of the door lock, the
operational status indicator « R
operational status indicator of the door lock flashes:
temperature in the washing drum is less than 50 °C and / or the current washing
programme has not progressed too far.
3. The door lock is deactivated automatically. The operational status indicator of the
door lock goes off: «
4. Open the door.
5. Reload the laundry and close the door.
6. Press the « S
TART
If the door lock will not be released and the door cannot be opened, the
temperature inside the washing drum is more than 50 °C or the current washing
programme has progressed too far.
NOTICE! It is not possible to open the door while the door lock indicator is
on. Do not open the door by force. To open the door by force can damage
the appliance seriously. RISK OF DAMAGE!
NOTICE! Any damage to the appliance and / or the door caused by
forcible opening of the door are not subject to the guarantee or the
warranty!
NOTICE! If there is a lot of foam or water in the drum, open the door very
carefully. Use a dry cloth to prevent foam and / or water from leaking out
of the drum while the door of the appliance is opened.
FOLLOWS
/ P
» -
AUSE
BUTTON
ELOAD LAUNDRY
».
/ P
» -
AUSE
BUTTON
~
.
once. The washing cycle is interrupted.
to reactivate the programme.
~
135
,
PROCEED AS
» goes on and the
; requirements: the
«
»
Werbung
