Pkm WA10-ES1415DI Bedienungsanleitung Seite 123

After starting a programme, the display of the appliance briefly indicates «
This means: at the beginning of a programme, the appliance detects the weight
of the laundry and adjusts the washing time automatically.
It is also possible that the current running time of the set washing programme is
adjusted automatically (depending on the washing situation, load, additionally
selected functions, etc.) so that it may vary from the specified programme
duration.
H
1. Load the drum.
2. Fill the detergent(s) into the relevant sections of the dispenser according to the
desired programme.
3. Open the tap.
4. Set the desired programme using the
switched on and in
5. The (10) indicates the duration of the programme (hours : minutes)
DISPLAY
6. Additionally, further functions such as temperature, spin speed, delay, etc. can be
selected by pressing the corresponding buttons; s. chapter 4.4.1 S
THE ADDITIONAL FUNCTIONS
7. Press the « S
TART
8. The door lock will be activated automatically. The operational status indicator of
the door lock goes on: «
9. When the programme is finished, the display indicates the word « END » and an
acoustic signal sounds (if the acoustic signals are activated / see also chapter 4.4.1
S
ELECTION OF THE ADDITIONAL FUNCTIONS
10. The door lock is deactivated automatically. The operational status indicator of
the door lock goes off: «
11. When the programme is finished, always turn the
programme selection back to « O
also chapter 4.6 E
It is possible that the current run time of the selected washing programme will be
adjusted automatically so that it may vary from the washing time which is
indicated on the display.
Depending on model.
35
OW TO SET AND START A WASHING PROGRAMME
STANDBY MODE
.
/ P » -
AUSE BUTTON
».
».
ND OF A WASHING PROGRAMME
. The washing machine is now
ROTARY KNOB
.
(9) to start the washing programme.
).
» to switch off the appliance completely; see
FF
.
~ ~
123
ELECTION OF
for the
ROTARY KNOB
----
».
35 .