Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. The washing machine must be switched on. You can deactivate the acoustic
signals while the washing machine is set or during operation.
2. Press and hold the « S
seconds simultaneously.
3. The corresponding operational status indicator goes off: « S
DEACTIVATED
4. The acoustic signals are activated.
4.5 Door Lock
WARNUNG! If you stop a running programme, the temperature of the
water, the laundry and the drum can be extremely high. Be very careful
while removing the laundry. RISK OF SCALDING! RISK OF BURNS!
❖ The appliance is equipped with an automatic door lock.
➢ After programme start, the door lock is activated automatically and the
operational status indicator of the door lock «
The door is always locked while a programme is running. It is not possible to
open the door while the door lock indicator is on. To open the door by force
can damage the appliance seriously.
1. The door lock is activated. The operational status indicator of the door lock is
on: «
».
2. Press the « S
TART
reload laundry.
3. If the running washing programme permits the deactivation of the door lock, the
operational status indicator of the door lock flashes
temperature in the washing drum is less than 50 °C and / or the current washing
programme has not progressed too far.
4. It is very important to check the water level and water temperature inside the
drum before opening.
5. The door lock is deactivated. The operational status indicator of the door lock
goes off: «
6. You can open the door.
Depending on model.
38
H
OW TO ACTIVATE THE ACOUSTIC SIGNALS
. » -
PIN
BUTTON
».
H
OW TO OPEN THE DOOR MANUALLY
/ P
» -
AUSE
BUTTON
».
and the « M
» goes on. The door is locked.
if you want to open the door; e. g. to
~
~
131
W
» -
Y
ASH
BUTTON
:
; requirements: the
38
«
»
for 2
IGNALS
Werbung
