Manual Preparation - struers TegraPol-11 Gebrauchsanweisung

Manual Preparation

TegraPol-11/ -15
TegraForce-1
Instruction Manual
If a specimen cannot be prepared using a standard specimen mover
plate or specimen holder, it can be prepared manually, with the
automatic dosing.
Select the required preparation step and make sure that the

specimen mover is in the upright position.
Press Start.

Press Enter to confirm selection of a manual preparation step.

Press Start again to start the preparation step.

Dosing of suspension and lubricant runs automatically according
to the pre-set parameters and the step is stopped automatically
when the set preparation time has expired.
25