Software Settings; Changing The Language And Display Contrast - struers TegraPol-11 Gebrauchsanweisung

Software Settings

Changing the Language and
Display Contrast
TegraPol-11/ -15
TegraForce-1
Instruction Manual
When the machine is started for the first time, a screen display
prompts you to select your preferred language. If you want to change
the language after this, refer to "Changing the Language and Display
contrast".
During normal operation, immediately after start up, where the splash
screen is displayed, the software goes to the MAIN MENU. This is
the highest level in the menu structure. From this menu, you can
enter the Preparation and Configuration menus.
Before continuing, we recommend that you select the language that
best suits you if you have not done so already.


Use the Arrow buttons to select

Configuration.




Press ENTER
CONFIGURATION Menu.




Use the Arrow buttons



Press ENTER
pop-up menu.


to activate the
to select Language.


to activate the Language
11