struers TegraPol-11 Gebrauchsanweisung Seite 44

Error message
TegraPol with TegraForce and TegraDoser-5
TegraDoser-5 nozzle block not
mounted
Method not valid anymore
Tube cleaning in progress
Suspension not applicable
Lubricant not applicable
38
TegraPol-11/ -15
TegraForce-1
Instruction Manual
Explanation
Nozzle block missing, or not
correctly seated.
Method has been edited on
TegraDoser-5.
The suspension specified in the
method has not been configured on
the TegraDoser-5.
The lubricant specified in the
method has not been configured on
the TegraDoser-5.
Action required
Make sure nozzle block is securely
mounted.
Re-read method by going back to
method list and select method
again.
Wait for cleaning process to finish.
Configure the suspension in one of
the pump positions, or select
another suspension in the method.
Configure the lubricant in one of the
pump positions, or select another
lubricant in the method.