Preparation Process Set-Up; Selecting A Preparation Method - struers TegraDoser-5 Gebrauchsanweisung

Preparation Process Set-up

Selecting a Preparation Method

18
TegraDoser-5
Instruction Manual

Press Esc to accept the definitions and return to the
Esc
CONFIGURATION MENU.
Before the TegraPol can be started, a preparation method must be
selected. There are two types of methods: Struers Methods and User
Methods. Follow the instructions in Chapters 3 and 4, respectively, to
select the desired method.
Depending on the type of TegraForce fitted, the Main Menu on the TegraPol
will display different possibilities:
TegraForce-1: SINGLE SAMPLE PREPARATION is displayed
TegraForce-3: SAMPLE HOLDER PREPARATION is displayed
TegraForce-5: SAMPLE HOLDER PREPARATION and
SINGLE SAMPLE PREPARATION is displayed
On the TegraPol: if the MAIN MENU is not currently

displayed, press Esc until you are in the MAIN MENU.

Use the Arrow buttons



Press ENTER
SAMPLE HOLDER PREPARATION Menu.

Within this menu, up to 11 groups with preparation

methods can be displayed.
Use the Arrow buttons

 methods:
Note!
to select the correct option:


to activate the SINGLE SAMPLE /
to select the correct group of
