Pump Installation - Wilo Stratos PARA-C Einbau- Und Betriebsanleitung

en
CAUTION
An incorrect installation position may damage the pump!
• Select the installation point in line with the permissible installation positions (Fig. II).
• The motor must always be installed horizontally.
• Install shut-off devices upstream and downstream of the pump to facilitate pump replacement.
• Align the upper shut-off device laterally.
CAUTION
Leaking water may damage the control module!
• Align the upper shut-off valve such that leaking water cannot drip onto the control module.
• If the control module is sprayed with liquid, the surface must be dried off.
• When installing in the feed of open systems, the safety supply must branch off upstream of the pump
(EN 12828).
• Carry out all welding and soldering work prior to the installation of the pump.
• Flush the pipeline system.
CAUTION
Contamination from the pipeline system can destroy the pump during operation!
• Before installing the pump, flush the pipeline system.
• Do not use the pump to flush the pipeline system.

7.1.2 Pump installation

WARNING
Risk of fatal injury from magnetic field!
Risk of fatal injury for people with medical implants (e.g. pacemakers) due to permanent
magnets installed in the pump.
• Follow the general behavioural guidelines that apply to handling electrical devices!
• The motor must never be removed!
NOTICE
The magnets inside the motor do not pose a danger provided the motor is completely as-
sembled.
52 Installation and operating instructions • Wilo-Stratos PARA-C/-CZ • Ed.01/2023-04