Switching The Instrument On And Off; First Startup Wizard - Mettler Toledo SevenDirect SD23 Benutzerhandbuch

1 Insert the correct connector plug into the AC adapter until
it is completely inserted.
2 Connect the cable of the AC adapter with the DC socket of
the instrument.
3 Install the cables in such a way that they cannot be
damaged or interfere with operation.
4 Insert the plug of the AC/DC adapter into a power outlet
that is easily accessible.
To remove the connector plug, push the release button
and withdraw the connector plug.

4.4 Switching the instrument on and off

Switching the instrument on
1 Press the power switch.
The StatusLight turns on.
2 Wait for 1 - 2 seconds, the screen lights up and displays the startup image.
3 The instrument is initialized. The instrument will be ready for operation in about 25 seconds.
Login screen appears.
Switching the instrument off
1 Press the power switch for 3 seconds.
2 The instrument stops running tasks and shuts down. This process will take some time.
The screen turns off.

4.5 First Startup Wizard

At first startup of the instrument or after a factory reset, a First Startup Wizard guides you through the major
settings of the instrument.
1 Select a Language from the language list.
The user interface switches to the language selected
immediately.
2 Tap Next.
3 Scroll down to read the EULA and make it active.
4 Tap Next.
SevenDirect™ SD23 13