Downloaded from
www.Manualslib.com
Tutorial / Menu (menu)
4.5
Cleaning
The built-in sample pump or an external syringe can be used to fill the measuring
cell with cleaning liquid.
- Empty the measuring cell completely before cleaning. Press the drain button
downward completely.
- Clean the measuring cell daily with a suitable cleaning liquid.
- For very dirty measuring cells, let the inside of the cell soak in the cleaning
liquid.
- Repeat cleaning if necessary.
- If the housing is soiled, clean with a cleaning tissue.
4.6
Switching off and on
Switching off
- Press and hold the esc key until the display is turned off.
The instrument is now turned off.
Switching on
- Press and hold the esc key until the display appears.
The instrument is ready for operation.
5
Menu (menu)
The menu of the Densito 30P offers the following functions:
• Measurement Unit (Measure Unit)
• Temperature Unit (Temp. Unit)
• Measure Mode
• Adjustment Mode (Calib. Mode)
• Interface
• Beep
• LCD-Contrast
• Automatic switch-off (Power )
• Software version (Version No.)
5.1
Using the menu
Entering the menu
- Press the keys ok/meas. and esc simultaneously.
The instrument switches to the menu.
FUNCTION
1/2
Measure Unit
Temp. Unit
Measure Mode
Calib. Mode
Interface
FUNCTION
2/2
Beep
LCD Contrast
Power
Version No.
8
manuals search engine
see Chapter 5.2
see Chapter 5.3
see Chapter 5.4
see Chapter 5.5
see Chapter 5.6
see Chapter 5.7
see Chapter 5.8
see Chapter 5.9
see Chapter 5.10
Temp. Unit>
1/2
°C
°F
OK
esc
METTLER TOLEDO Densito 30P