hanseatic SY-103E9G-P1-C13-L22-600 Gebrauchsanleitung Seite 46

Page EN-18 Assembly
4. Open the locks (14) on the grease fil-
ter (15) and carefully remove the grease
filter.
(11)
5. Carefully hang the Exhaust hood on the
two round-head screws (11) using the key-
hole openings.
6. If necessary, remove the Exhaust hood
again to loosen or tighten the screws in
order to ensure that the hood is flush with
the wall.
2x
(12)
7. Turn two round-head screws (12) into the
prepared dowels to secure the exhaust
hood, and screw the exhaust hood tightly
to the wall.
(11)
8. Place the grease filter (15) with the pins
into the openings.
9. Push the lock (14) to the side; snap the
grease filter (15) shut and release the
lock again.
10. Close the cover (13) again and allow it to
click into place.
The exhaust hood is now mounted to the
wall.
(12)
(13)
(14)
(15)