VOLTCRAFT VC950 Bedienungsanleitung Seite 40

Battery replacement symbol;
please replace the batteries as soon as possible to avoid measuring errors!
Symbol for the diode test
Symbol for the acoustic continuity tester
AC Alternating value for voltage and current
DC Direct value for voltage and current
mV Millivolt (exp.–3)
V Volt (unit of electric voltage)
A Ampere (unit of electric current)
mA Milliampere (exp.–3)
�A Microampere (exp.–6)
Hz Hertz (unit of frequency)
kHz Kilo Hertz (exp.3)
MHz Mega Hertz (exp.6)
W Watt (unit of electric effective power)
VA Voltampere (unit of electric apparent power)
% Percentage for duty cycle measurement
°C Degrees Celsius
°F Degrees Fahrenheit
Ω
Ohm (unit of electric impedance)
kΩ Kilo Ohm (exp.3)
MΩ Mega Ohm (exp.6)
nF Nanofarad (exp.–9, unit of electric capacity, symbol )
µF Microfarad (exp.–6)
mF Millifarad (exp.-3)
Symbol for the capacity measuring range
Warning symbols for voltages >30 V AC and >42 V DC and incorrectly connected
measuring lines
Bargraf bar display
Symbol for the integrated fuses
40