Saeco NEXTAGE CAP010 Bedienung Und Wartung Seite 93

h1 70 mm
H2 200 mm
Beverage Multiplier
This control allows the user to multiply the number of
beverages to be brewed.
Every time the icon shown in the figure is pressed, the
counter increases by 1 unit from a minimum of 1 to a
maximum of 8 beverages.
After pressing
multiplier icon, only the
beverages programmed for
being multiplied will still be
enabled.
If no beverage icon is
pressed within 5 seconds
after pressing the multiplier
icon, the counter is reset
to 1.
During
brewing, the number of
the
process
number of the required
beverages is displayed.
Beverage Brewing
To brew a beverage press the icon corresponding to the
required beverage.
During the beverage brewing, a screen with the following
layout is displayed:
• On the bottom: the product brewing bar.
• In the middle, the picture of the beverage being brewed in
that moment.
• On the top left side:
brewing.
• On the top right side: a button which stops the current
phase but allows you to go on with any subsequent ones.
These buttons feature a
protection
accidental
order to activate the stop
the
function,
button when the message
contained in it is green. In
short, you must keep the
button pressed until the
message contained in it
becomes
release it before it turns
red.
the beverage
current brewing
and the
a button to stop the beverage
against
pressing.
release
green,
English
total
In
the
and
93