Saeco NEXTAGE CAP010 Bedienung Und Wartung Seite 77

The machine should be
supplied
treated with a descaling
device, particularly in case
of water with high content
of calcium and magnesium
salts (hard water).
Connect the water filter (C) to the water network (D).
Before connecting
water filter to the machine,
perform a wash cycle until
the water is clear. Then
connect the water filter to
the machine.
C Water Filter
D Water Net
E Drain pipe
Connect the machine to the drinking water network by
means of the coupling (F). Only a tube and couplings
suitable "for food" must be used for the connection.
with water
the
F Water inlet coupling
Insert the filling tube and the drain tube into the hole A.
Connect the drain tubes to the drain pipe (E).
In case you need to move
the machine to a different
place, the old fitting unit
must be replaced with a
new one (water network
connecting hose).
The water network hose
must be certified according
to the IEC 61770 standard.
In case of filling tube
replacement, use the new
set of tubes supplied with
the appliance, not the old
one.
English
77