• wash the inside of the container and dry it carefully before
reassembling it;
• follow the above procedure in the reverse order to refit
the canister, ensuring that the catch A slots into place.
To clean the coffee bean hopper, follow the procedure below:
• Remove the coffee bean hopper lid.
• Lift the retainer FE and pull the rear level LP in a way to
close the coffee bean hopper partition, then disengage the
hopper from the upper surface of the machine.
• Brew a few coffee cups as a test, to remove the coffee
beans from the coffee grinder;
• Slide the hopper upwards.
• Wash the inside of the container and dry it carefully
before reassembling it.
• To reinstall the hopper proceed in reverse order and
make sure that the two pins are inserted into the special
slots.
10.3
Unscheduled Maintenance
Unscheduled maintenance includes every repair or part
replacement.
The Maintenance Technician is the only person authorised
to perform these operations.
English
111