Saeco NEXTAGE CAP010 Bedienung Und Wartung Seite 62

English
Before connecting
appliance to the water
network, please read and
follow the
regulations in force in your
country.
If the power cord is
damaged,
replaced
manufacturer, its service
centre or by adequately
qualified
order to avoid any risks.
It is recommended to
install a residual current
device (RCD) with a rated
residual
exceeding 30 mA.
Connect the appliance to a
drinking water mains with
pressure
MPA and 0.8 MPA (1.5
and 8 bar); see data on the
data plate.
62
the
applicable
it must be
by the
personnel
current not
between 0.15
In case of filling tube
replacement, use the new
set of tubes supplied with
the appliance, not the old
one.
Access to the internal area
is restricted to persons
having
practical experience of the
appliance, in particular as
in far as safety and hygiene
are concerned.
Never clean the internal area of
the machine with power supply
on or with the plug connected.
In any event do not use water
jets or detergents.
knowledge and