Intended Use; Features And Functions - VOLTCRAFT VC-OBD-9610 Bedienungsanleitung

3. Intended use

The product is used to establish communication with control units in motor vehicles. The list of
vehicles supported by the device can be found in "Technical data". The device is connected to
the vehicle's data bus system via the OBD II interface and powered simultaneously.
This product is only intended for indoor use and in protected areas of vehicles. Contact with
moisture must be avoided at all times.
For safety and approval purposes, do not rebuild and/or modify this product. Any misuse of the
product may damage the product itself or the vehicle to which it is connected. Furthermore,
improper use can cause hazards such as fire, overheating, vehicle malfunction, etc.
Read the operating instructions carefully and store them in a safe place. Only make this product
available to third parties together with its operating instructions.
All company and product names contained herein are trademarks of their respective owners.
All rights reserved.

4. Features and functions

• Supports vehicles such as VW, AUDI, SKODA, SEAT, Bentley etc.
• Supports the following OBD II protocols: CAN/J1850 PWM/J1850 VPW/ISO9141/KWP 2000
• Supports the following VW diagnostic protocols: KWP1281/KWP2000/KWP1281CAN16/
KWP2000CAN16/CAN20/UDS)
• Special functions: service reset, throttle adjustment, parking brake pad change, steering
angle learn function, TPMS reset, injector adjustment, battery registration, DPF function
• OBD II functions: read fault codes, clear fault codes, I/M readiness test, EVAP system test,
vehicle information readout
• 320 x 240 pixels colour screen
38