Introduction; Explanation Of Symbols; Intended Use - VOLTCRAFT MS-18/2 Bedienungsanleitung

1. Introduction

Dear customer,
Thank you for your purchasing the multitester.
With this product you have bought a state of the art product. This product satisfies the standards of the established
European and national guidelines. CE-conformity has been proven, the relevant documents are in the manufacturer's
possession. We kindly request the user to respect this operating manual to preserve this condition and to ensure safe
operation.
If there are any technical questions, please contact:
www.conrad.com/contact

2. Explanation of symbols

The symbol with the exclamation mark in the triangle is used to indicate important information in these
operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.

3. Intended use

The agreed upon use of the device covers:
• Testing of alternating voltage:
- direct measuring 70 – 250 V AC
- indirect measuring 70 – 500 V AC
• Polarity check 1.2 V to 36 V DC (direct voltage)
• Continuity check approx. 0 to 5 MOhm
• Testing of microwaves and televisions for radiant emittance
• Use only in dry environment
Any use other than the one previously described can lead to damages on the product. Moreover, this in-
volves dangers, such as e.g., short-circuit, fire, electric shock, etc. No part of the product may be modified
or rebuilt and the housing must not be opened.
Always observe the safety instructions and technical data.
12