VOLTCRAFT VC-OBD-9610 Bedienungsanleitung Seite 41

• If you have questions that remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
• Any person operating, installing, launching or servicing this unit must comply with
these operating instructions.
Product
• Make sure you read and follow the instructions in your vehicle's service manual
before using the product.
• Always seek professional advice if you are unfamiliar with the use of car diagnostic
tools and vehicle repair. Failure to observe these instructions may cause damage
to the vehicle.
• Adhere to the standard safety regulations when working on the vehicle, especially
in the engine compartment.
• Always keep your clothes, hair, hands, tools, test equipment, etc., clear of all
moving and hot parts of the vehicle and engine.
• Exhaust fumes are noxious! Never run the vehicle's engine in a place without
adequate ventilation.
• Never leave the vehicle unattended while performing tests.
• Risk of electrocution when the engine is running! Use extreme caution when
working near the ignition coil, wiring, distributor cap and spark plugs.
• Fumes and gases emitted by fuels and the vehicle battery are highly flammable.
Keep the engine compartment away from sparks, hot equipment, open flames,
etc., to prevent explosion or fire. Do not smoke near the vehicle during work.
• Do not connect or disconnect any test equipment with the ignition on or the engine
running.
• Ensure the gear lever is always in the "PARK" (automatic gearbox) or "NEUTRAL"
(manual gearbox) position. Activate the parking brake.
• Tests in drive mode must only be carried out by an assistant and never by the
driver himself.
41