Technical Specifications; Charging Time - Parkside PRMA 40-Li C1 Originalbetriebsanleitung

GB
13a Plastic tabs
13b Grass collection box rods
13c Handle
13d Auxiliary handle
20 Switch button
21 LED display
22 Battery charge level indicator
23 Blade
24 Blade bolt
25 Motor spindle
26 Level indicator

Technical specifications

40V Cordless
Lawn Mower .................... PRMA 40-Li C1
Motor voltage U ............ 40 V
Motor current I ................................16 A
Idle speed n ......................... 2900 min
1
Idle speed n ......................... 3300 min
2
Cutting circle ............................. 400 mm
Cut height .. 25/30/38/45/55/65/75 mm
Protection class ....................................III
Protection type .................................IPX1
Weight
(with batteries, 4 Ah) ............... 13.2 kg
(without battery and charger) ........ 12 kg
Grass collection box volume .............. 50 l
Sound pressure level
(L ) ....................... 80.8 dB; K
pA
Sound power level (L
measured ......... 91.0 dB; K
guaranteed ............................... 95 dB
Vibration (a ) on the upper bar
h
right ................ 1.97 m/s
left .................. 1.90 m/s
Temperature.......................... max. 50 °C
Charging process ...................4 - 40 °C
Operation .......................... -20 - 50 °C
Storage .................................0 - 45 °C
For use with smart batteries
(Smart PAPS 204 A1/Smart PAPS 208 A1)
24
; (2x 20V)
= 3 dB
pA
)
WA
= 2.05 dB
WA
; K=1.5 m/s
2
2 ; K=1.5 m/s
Operating frequency/
Frequency band .... 2400 - 2483.5 MHz
Max. transmission power .......≤ 20 dBm
Noise and vibration values have been
determined according to the standards and
regulations mentioned in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
-1
-1 which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. For this purpose all
parts of the operating cycle have to
be considered (for example, times
when the electric tool is switched
off and times when it is switched on
but running without any load).

Charging time

The device is part of the (Parkside) X 20 V
2
2 TEAM series and can be operated with bat-
teries of the (Parkside) X 20 V TEAM series.
Batteries of the (Parkside) X 20 V TEAM
series may only be charged using chargers
of the (Parkside) X 20 V TEAM series.