Description Of Functions; Safety Equipment; Technical Data - Parkside PBM 132 A1 Originalbetriebsanleitung

GB IE NI
29 Cutting height position
13a Hubcap
13b Wheel bolt
13c Safety washer
30 Blade
31 Blade bolt
32 Motor spindle
33 Clamping disk

Description of functions

The device is powered by a powerful
4-stroke engine (Zongshen 132cc Easy
Start).
The device is equipped with a robust plas-
tic housing, a grass collection box and a
foldable grip handle.
Please refer to the descriptions below for
information on how the operating elements
work.

Safety equipment

2 Safety bracket
The device stops when the safety brack-
et is released.
15 Exhaust guard
Prevents hands or flammable materials
from coming into contact with the hot
exhaust.
6 Impact protection
Protects the operator from ejected parts
and against unintended contact with
the blade when mowing without the
grass collection box.

Technical data

Petrol Lawnmower ...... PBM 132 A1
Engine ........... Zongshen 132cc Easy Start
Engine displacement ............. 132 cm
Power ..........................1.8 kW (2.45 PS)
6
Max. speed (n
Blade tightening torque ................. 45 Nm
Petrol tank volume ......................... 0.85 l
Octane rating ............................... 95-98
Engine oil tank volume ..................... 0.4 l
Spark plug ...........................Torch F5RTC
Cutting circle .......................... ø 410 mm
Cutting height .............. 3-level, 25-65 mm
Grass collection box volume .............. 40 l
Weight (incl. grass collection box,
with an empty tank) .....................14.6 kg
Sound pressure level
(L ) .............. 74.5 dB(A); K
pA
Sound power level (L
measured ...... 94.5 dB(A); K
guaranteed ........................... 96 dB(A)
Vibration on handle
(a ) ....................3.9 m/s
h
Levels of noise and vibration were deter-
mined according to the standards and reg-
ulations in the declaration of conformity.
The vibration emission value has been
measured according to a standardised test-
ing method and may be used for compari-
son with another device.
The indicated vibration emission value may
also be used for an introductory assess-
ment of the exposure.
Warning: The vibration emission
value whilst actually using the de-
vice may vary from the given values
regardless of the type and way in
which the device is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
(cc)
3 working hours. All parts of the op-
erating cycle have to be considered
while doing so (for example, times
) ......................2850 min
0
pA
)
WA
WA
; K= 2.0 m/s
2
-1
= 1.84 dB
= 1.84dB
2