Refrigerant Consumption Display - Waeco AirConServiceCenter ASC1000 Bedienungsanleitung

Operation
✓ The entry is created.
You can now create another entry
(use the cursor keys to select and proceed as described) or press
STOP to exit the menu.
The personal entries are saved in the control board, not on the flash
memory card. The entries will be retained even after updating the
software.
The entries are sorted and stored chronologically (not alphan-
umerically).
7.4

Refrigerant consumption display

The station saves the data for the filling and extracted refrigerant
amounts. You can print out this data as an annual or monthly overview.
1. In standby mode, use the cursor keys
start":
2. Press ENTER to confirm.
3. Use the cursor key
to confirm:
4. Enter the password 9051 and press ENTER to confirm.
5. Use the cursor keys
select the year and press ENTER to confirm:
80
AUDI 0
A4 (8E)
1
Short selection
Free selection
Other selections
ENTER-OK
to select "Service" and press ENTER
Flushing
Reset Scales.
Service.
ENTER-OK STOP-EXIT
Service.
or to
2013
AirConServiceCenter
or to select "Schnell-
----
EN