Service tasks
8.7
Correcting the filling quantity for long service
hoses
If longer or shorter service hoses are required for the device, you need to
adjust the filling quantities to the new hose lengths.
I
NOTE
The service hoses for the high and low pressure sides must always be
of the same length, as otherwise the filling quantities will not be correctly
measured.
1. In standby mode, use the cursor keys
"Other selections":
2. Press ENTER to confirm.
3. Use the cursor keys
4. Press ENTER to confirm.
5. Enter the password "7732".
6. Enter the hose length in centimetres.
7. Press ENTER to confirm.
94
Short selection
Free selection
Other selections
ENTER-OK
or
to select "Service":
Int.vessel filling
Flushing
Reset Scales.
Service.
AirConServiceCenter
or
to select
EN