Refrigerant Consumption Display - Waeco AirCon Service Center ASC2500 Bedienungsanleitung

Operation
9. Enter the refrigerant quantity and press ENTER to confirm.
✓ The entry has been created.
You can now create another entry (use the cursor keys to select and
proceed as described) or press STOP to exit the menu.
The personal entries are saved in the control board, not on the flash
memory card.The entries will be retained even after updating the
software.
The entries are stored chronologically (not alphanumerically).
8.4

Refrigerant consumption display

The station saves the data on the amount of refrigerant filled and
extracted. You can print out this data as an annual or monthly overview.
1. In the basic menu, use the cursor keys  or  to select "Other
selections":
2. Press ENTER to confirm.
3. Use the cursor key  to select "Service" and press ENTER to
confirm:
4. Enter the password "9051" and press ENTER to confirm.
82
AUDI
A4 (8E)
2000 – 2004 g.
AUDI 0
A4 (8E)
1
Short selection
Free selection
Other selections
ENTER-OK
Flushing
Reset scales.
Service.
ENTER-OK STOP-EXIT
Service.
0
500
----
ASC2500
EN