Using The Appliance; Energy Efficient Usage; Operating The Hood; Replacement Of Lamp - Beko HNT61110X Anleitung

Using the appliance

3
3.1 Controlling the appliance
KEY FUNCTION
A : Light On / Off
Pull the sliding plate to the front.
Press the button downwards to
turn on the lamp or upwards to
turn off the lamp.
B : 1 and 2 Speed
Pull the sliding plate to the front.
Press the button upwards to op-
Button
erate the hood at speed level 1,
and downwards to operate the
hood at speed level 2.
C : 3rd Speed
Pull the sliding plate to the front.
Press the button downwards to
Button
operate the hood at speed level
3.

3.2 Energy efficient usage

• When using your appliance, adjust the speed
settings according to vapour and odour intensity,
in order to save energy.
• Use low speeds (1-2) under normal conditions,
and high speed (3) for intense odour and vapour.
• The lamps on the hood are placed for illuminat-
ing the cooking area.
• Using them for environmental lighting shall
cause unnecessary energy expenditure and in-
sufficient lighting.

3.3 Operating the hood

• Your appliance contains a motor that has various
speeds.
• For better performance, we recommend using low
speeds under normal conditions and high speeds
in cases of strong odours and intense vapour.
• You can start your appliance by pressing on the
desired speed setting button. (B, C)
Cooker Hood / User Manual
• You may illuminate the cooking area by pressing
the lamp (A).

3.4 Replacement of lamp

CAUTION: Disconnect the electrical
A
supply of the hood. Leave the lamps
to cool down first because they co-
uld burn your hands when they are
hot.
Remove the aluminium cartridge filter. Remove the
defective bulb and replace with a new one with the
same rating.
Bulb
Bulb Power
Holder / Socket
Bulb Voltage
Size
ILCOS Code
Luminous flux
Correlated colour tem-
perature
This product contains a light source of energy ef-
ficiency class "E".
MAX 3 W
3 W
E 14
220 - 240 V
35 x 100 mm
D R B B / F - 3 - 2 2 0 -
240-E14-35/100
410 lm
2700 K
9 / EN