Herunterladen Inhalt Inhalt Diese Seite drucken

Using The Appliance; Use Of The Appliance; Things To Do For Energy Saving; Lamp Replacement - Beko HNU51311SH Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für HNU51311SH:
Inhaltsverzeichnis

Werbung

3

Using the appliance

3.1 Use of the appliance

1 2 3
• Bring the lamp switch to position '0' to turn off
the lamp.
• Bring the lamp switch to position '1' to turn on
the lamp.
• Bring the motor switch to position '0' to turn off
the motor.
• You can operate the motor in the 1st speed level
minimum and in the 3rd speed level maximum
according to the density of cooking steam.

3.2 Things to do for energy saving

• Ensure sufficient air intake to make the hood
operate efficiently and with low operation noise
during cooking.
• Set the fan level according to the density of
steam in kitchen. Use the high level only when
needed. A lower fan level means less energy
consumption.
• If dense smoke is expected in the kitchen, select
a higher level of fan in advance. It is required
to operate the hood much longer to remove the
smoke already spread all over kitchen.
• Turn off the hood when not in use.
• Clean or replace the filter at intervals stated,
thus, the efficiency of the ventilation is increased
and the risk of fire is eliminated.

3.3 Lamp replacement

WARNING: Cut the power supply
A
of the hood. Lamps may burn your
hands while hot, so wait for them to
cool down.
Cooker Hood / User Manual
Lamp
Power
3 W
Socket
E14
Voltage
220 – 240 W
Dimension
35x100 mm
ILCOS Code
DRBB/F-3-220-240-E14-35/100
• Remove the aluminum cartridge filter. Remove
the faulty lamp and replace it with the one hav-
ing the same value.
• If the appliance breaks down or
gets damaged, shut down the fuse
or unplug the appliance and call
the authorised service agent.
• If the supply cable is damaged, it
must be replaced by the manufac-
turer, its service agent or similarly
A
qualified personnel to avoid any
danger.
• Shut down the fuse or unplug the
appliance in case of breakdown
of the lamps of the appliance.
Replace immediately the faulty
lamps in order to prevent other
lamps from being overloaded (wait
for the lamps to cool down first).
MAX 3 W
9 / EN

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Hnu51311s

Inhaltsverzeichnis