Beko HNT61110X Anleitung Seite 13

Installation of appliance
5
• Make holes with Ø4 mm diameter on the points
marked as A, B, C, D on the installation tem-
plate.
• Drill the flue outlet hole specified in the installing
template in the sizes given.
Remove the appliance from its packaging. Install
the plastic flue flaps provided in the accessories to
the air outlet flue of the appliance as shown below.
(Figure 1)
1. Flap Pin Socket
2. Flap Pin
Insert the plastic pin (Figure 1/area no. 2) on the
pin socket on the motor exhaust (Figure 1/area
no.1). Then bend the flap lightly to insert the other
pin on the flap and insert the other pin to its socket
(Figure 1).
Cooker Hood / User Manual
(Figure 2)
By using the 4 x 40 screws provided with the hood,
install the appliance to the cabinet from the points
A, B, C and D. When the slider set moves, the front
panel shall not rub on the cabinet door (Figure 2)
(Figure 3)
Install flexible aluminium pipe to plastic flue outlet.
Install the other end of the pipe to the flue hole on
the wall (Figure 3).
13 / EN