Handling And Transportation - Beko HNT61110X Anleitung

Installation of appliance
5
5.4 Connecting to flue
If you are going to use the Ø 120/150 mm plastic
flue adapter, connect one end of the pipe to this
adapter, if you are not going to use it, to the direct
output on the product. Connect the other end of
the pipe to your flue. Check that these two con-
nections are tight enough so they will not come out
when the appliance runs on full power. Ensure that
the flaps inside the flue work when tightened with
clamp. Connect the flue connection duct outside
the adapter. If the connection duct is fitted inside
the adapter, the covers that prevent air return shall
remain closed and air won't be sucked in. The
length of the pipe connection as well as the num-
ber of elbows must be as minimum as possible.
(a)
Suitable OK
A : Flue exit pipe
B : Non return flaps
C: Plastic Flue
The valves are closed then the appliance is not
operating and prevent possible outside odour and
dust from entering inside.
5.5 Storage
• If you do not intend to use the appliance for a
long time, please store it carefully.
• Please make sure that the appliance is un-
plugged, cooled down and totally dry.
• Store the appliance in a cool and dry place.
• Keep the appliance out of the reach of children
14 / EN

5.6 Handling and transportation

• During handling and transportation, carry the
• Do not place heavy loads on the appliance or
• Dropping the appliance will render it non-opera-
(b)
Not Suitable
Not OK
appliance in its original packaging. The packag-
ing of the appliance protects it against physical
damages.
the packaging. The appliance may be damaged.
tional or cause permanent damage.
Cooker Hood / User Manual