Handling And Transportation - Beko CFB 6433 X Bedienungsanleitung

Installation of appliance
5

5.4 Handling and transportation

• During handling and transportation, carry the
appliance in its original packaging. The packa-
ging of the appliance protects it against physical
damages.
• Do not place heavy loads on the appliance or
the packaging. The appliance may be damaged.
• Dropping the appliance will render it non-
operational or cause permanent damage.
6
Troubleshooting
Troubleshooting
The product does not work. Check your fuse.
The product does not work. Check the electrical connection.
The product does not work. Check the electrical connection.
The lighting lamp does not
work.
The lighting lamp does not
work.
The lighting lamp does not
work.
The air intake of the pro-
duct is poor.
The air intake of the pro-
duct is poor.
The air intake of the pro-
duct is poor.
Hood / User Manual
Reason
Check the electrical connection.
Check the lamp switch.
Check the lamps.
Check the aluminum filter.
Check the air vent flue.
Check the carbon filter.
Help
Your fuse might be closed, make it work.
The mains voltage should be between 220-
240 V.
Check if the other products in your kitchen are
working or not.
The mains voltage should be between 220-
240 V.
The lamp switch should be in the "on" position.
The lamps of the product should not be faulty.
The aluminum filter should be cleaned at least
once a month under normal conditions.
The air vent flue should be in the ''on'' po-
sition.
For products with carbon filters, the filter sho-
uld normally be changed every 3 months.
13 / EN