Herunterladen Inhalt Inhalt Diese Seite drucken

Changing Date And Time; Putting Into Operation Scope Of Delivery; Scope Of Delivery; Mounting Easyplace - Mettler Toledo SevenDirect SD30 Benutzerhandbuch

Leitfähigkeits-messgerät
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

3.3.3.7 Changing date and time

The display field (1) shows the defined date or time. Scroll to move the list up/down to change the display
field.
Note the format of date and time can be defined in Menu > Settings > General.
4 Putting into Operation

4.1 Scope of delivery

Unpack the instrument and check the scope of delivery. Keep the calibration certificate in a safe place.
SevenDirect™ is delivered with:
AC adapter
Electrode arm EasyPlace complete
Protective cover
EU Declaration of conformity
Test report
User Manual (print version)

4.2 Mounting EasyPlace

1 Attach the base plate (1) to the pole (2) by tightening the
Screws (3) by hand.
2 Put the Top Cover Pole (4) on the pole.
3 Insert the Sensor Holder (5) into the electrode arm (6).
4 Put the Parking Beaker Insert (7) into the Parking Beaker
(8).
5 Put the Parking Beaker to the dedicated storage position
(9).
6 Put the Sachet Holder (10) to the dedicated position
(11), which is used to hold the buffers/standards.
7 Press the button (12) and slide up and down to adjust
the height.
8 Rotate the electrode arm to adjust the sensor position.
SevenDirect™ SD30
1
12
6
5
10
11
4
2
7
8
9
1
3
11

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis