Maintenance And Care; Cleaning The Instrument; Transporting The Instrument; Disposal - Mettler Toledo SevenDirect SD30 Benutzerhandbuch

Temperature Reading
Temperature
limit
Inactive
Active

6 Maintenance and Care

Do not open the housing of the instrument; it does not contain any parts that can be maintained, repaired or
replaced by the user. If you experience problems with your instrument, contact your authorized METTLER
TOLEDO dealer or service representative.

6.1 Cleaning the Instrument

NOTICE
Danger of damage to the instrument due to inappropriate cleaning agents!
The housing is made of acrylonitrile butadiene styrene/polycarbonate (ABS/PC). This material is
sensitive to some organic solvents, such as toluene, xylene and methyl ethyl ketone (MEK). If
liquids enter the housing they can damage the instrument.
1 Use only water and a mild detergent to clean the housing.
2 Wipe off any spills immediately.
The instrument is turned off and disconnected from the electrical outlet.
Clean the housing of the instrument using a cloth dampened with water and a mild detergent.
If you have questions about the compatibility of cleaning agents, contact your authorized METTLER TOLEDO
dealer or service representative.

6.2 Transporting the instrument

Note the following instructions when transporting the instrument to a new location:
Transport the instrument with care to avoid damage! The instrument may be damaged if not transported
correctly.
Unplug the instrument and remove all connected cables.
Remove the electrode arm.
To avoid damage to the instrument when transporting it over long distances, please use the original
packaging.
If the original packaging is no longer available, choose packaging that will ensure safe handling.

6.3 Disposal

In conformance with the European Directive 2012/19/EU on Waste Electrical and Electronic
Equipment (WEEE) this device may not be disposed of in domestic waste. This also applies
to countries outside the EU, per their specific requirements.
Please dispose of this product in accordance with local regulations at the collecting point
specified for electrical and electronic equipment. If you have any questions, please contact
the responsible authority or the distributor from which you purchased this device. Should this
device be passed on to other parties, the content of this regulation must also be related.
SevenDirect™ SD30
In progress
Within limit Out of limit
font: light blue
background: white
font: light blue font: red
background: white
Endpoint reached
Within limit Out of limit
font: white
background: dark blue background: light
blue
font: white
background: green background: red
▶
www.mt.com/contact
u www.mt.com/contact
17