Menu; Menu » Information; Menu » Settings; Submenu » Display - Dräger Alcotest 9510 Standard IR Gebrauchsanweisung

6

Menu

To select the menu options use the touchscreen function of

the display with the aid of the stylus supplied.
CAUTION
!
Only use the touchscreen with the stylus. Other tools
(e.g. ball point pen) might irreversibly damage the
touchscreen.
If no external keyboard has been connected for data entry,

a virtual keyboard is automatically shown on the display
which can be used with the stylus.
Using the menu button in the start bar the following menus

can be selected directly:
Information

Settings

Maintenance

Accept configurations and changes in the menus with

Confirm. The return to the menu is automatic.
NOTICE
i i
If the submenus are only selected to check the
configurations, select the cross X at the top right of the
display margin or Close to return to the menu.
6.1 Menu » Information «
The menu shows information
about the installed software
version (here only shown as an
example).
When contacting
DrägerService the software
version should always
stated.
6.2 Menu » Settings «
In this menu the location, time,
language etc. can be selected
or configured.
To select an option:
Double click on the desired

entry with the stylus
or
Select the desired entry

with the arrow keys of the
keyboard and confirm with Enter.
Dräger Alcotest 9510 Standard IR / EC
Alcotest 9510
About
M16 Version/PartNo: 2.3 / 8319523
M16 Checksum: 0x118C
WinCE Version/PartNo: 2.2 / 8319522
WinCE Checksum: 0x2745
WinCE Image Version: 1.1
ConfigFile Rev/Checksum: 0104 / 0x5585
be
Print
Menu
Settings
Display
Printer
Sound
Show Errorlogger
Language
Location Database
Change current location
Data Entry
Set date and time
Menu
6.2.1 Submenu » Display «
In this submenu, the display
can be rotated by 180°.
1. Enable or
checkbox Rotate display.
2. Accept the
Confirm. The return to the
menu is automatic.
6.2.2 Submenu » Printer «
In this submenu the selection is
made whether the report is
printed using the internal or the
external printer. The internal
printer is always activated.
Dependent on the instrument configuration the number of
measuring reports is permanently set to 1 copy (default) or a
selection can be made between 1 and 5 copies.
Accept the entry with Confirm. The return to the menu is
automatic.
6.2.3 Submenu » Sound «
X
In this menu you can adjust the volume and frequency of the
acoustic signal when breathing into the instrument.
6.2.4 Submenu » Show Errorlogger «
In this submenu the errors
which occurred
Close
operation are stored.
The following are documented:
01123875_en.eps
Time

Error code

Errors in this
X
operating states which impede
any further operation of the
instrument.
6.2.5 Submenu » Language «
In this submenu one of the
available languages can be
selected.
01323875_en.eps
By default English and German
are available as languages on
the instrument.
other languages can be added.
1. Highlight the desired language in the selection window.
2. Accept the selection with Confirm.
The selected language is loaded. You will then
automatically return to the menu.
Settings
Display
disable the Rotate display
entry with
Menu
Settings
Printer
internal
Copies
external
On Copies
Menu
Settings
during
Show Errorlogger
Date/Time
15.10.2007 13:32:38
02.10.2007 12:10:12
02.10.2007 11:49:47
28.09.2007 09:30:39
sense are
Menu
Settings
Language
Language: English
Optionally,
Menu
Menu
X
Confirm Save Close
04223875_en.eps
X
1
1
Confirm Save Close
01423875_en.eps
X
Error
108
107
109
107
Close
01523875_en.eps
X
Confirm Save Close
01623875_en.eps
23