Technical Data - ATH-Heinl ATH Cross Lift 40 Bedienungsanleitung

Avoid strong swinging movements
on the vehicle
1.5

Technical data

Type
Load capacity main stroke
Load capacity wheel-free jack
Time for lifting process (2000 kg)
Time for lowering (2000 kg)
Electrical system
Control voltage
Motor
rpm
Upstream fuse
Connection cable
Protection class
Flow rate
Working pressure
2
Required compressed air supply
Recommended hydraulic oil
Oil quantity
Ground anchoring
Anchor quantity
Permissible sound value
Weight
® Copyright ATH-Heinl GmbH & Co. KG / All rights reserved / Misprints and technical changes reserved
72
If there is a danger of a vehicle
falling, leave the danger area
immediately.
ATH Cross Lift 40
4000 kg
2500 kg
70 s
60 s
3/400V/50Hz
DC 24 V
3,5 KW
1375
3 C 16 A
Min. 5 x 2,5m
IP 54
4,8 cm /rev
3
240 bar (max. 300 bar)
7 bar
Summer (10° to 45°): HVLP-D 46 (e.g.: Eni PRECIS HVLP-D)
Winter (below 10°): HVLP-D 32 (e.g.: Eni PRECIS HVLP-D)
Approx. 18 l
Bolt anchor: M16 x 180 (e.g.: Atrion ABL-W 16-060-180)
Composite anchor: M16 x 190 (e.g.: Atrion AVA-W 16-045-190)
16 pieces
≤ 80 dB
2400 kg
Release date: 05.04.2023 / Product manufacturer ATH-Heinl GmbH & Co. KG
2