ATH-Heinl ATH Cross Lift 40 Bedienungsanleitung Seite 95

5. As soon as the air has escaped from the line and hydraulic oil is coming, close the connection.
6. Move the main shear of the wheel-free jack upwards and leave it in the end position.
7. Open cock C
8. Open bleed screw connection of slave cylinder
9. Open the connection hose to the main cylinder (opposite side).
10. Carefully press the Lift button and watch until oil emerges from the bleed screw connection of the slave
cylinder.
11. As soon as the air has escaped from the bleed screw connection of the slave cylinder and hydraulic oil is
escaping, close the connection.
12. Carefully press the Lift button again and watch until hydraulic oil escapes from the connection hose to the
master cylinder (opposite side).
13. As soon as the air has also escaped here and hydraulic oil is escaping, close the connection.
14. You can start with the equalization of the rails free stroke via the stopcock.
Finally, a test of the main lift and free lift with load can be carried out. During this test, constantly observe the lift
and the load.
® Copyright ATH-Heinl GmbH & Co. KG / All rights reserved / Misprints and technical changes reserved
Release date: 05.04.2023 / Product manufacturer ATH-Heinl GmbH & Co. KG
95